Iowa Solar Installation

Archive for September, 2011

Environmental Statements – How to Address Contaminated Land Issues

Under the relevant European Directives, an Environmental Statement is the formal product of an Environmental Impact Assessment. Environmental Statements are often organised in a way that describes the environmental baseline, mitigation and effects for each type of environmental receptors: ecology, water resources, archaeological resources, human beings etcetera. Contaminated land is often managed in the same ways as the various environmental receptor groups, although it is principally a cause of impacts rather than a receptor. It also often refers to a pre-existing condition and its damaging effect is on a variety of different receptors such as human health, structures and buildings, surface water features, groundwater features and ecology. This often means that land contamination specialists struggle with integrating the issue in a logical manner in an Environmental Statement. Sticking to the structured approach of an environmental statement is essential to ensure a clear description of the existing environmental condition, the potential impacts and the actions taken to avoid, minimise, offset or manage the impacts. This article is based on UK practice and legislation, although fundamentally the issues should be similar within other contexts.

Contaminated land is in many countries considered on a source-pathway-receptor basis. This is important to understand the impact land development can have on the issue of contaminated land. Development can interfere with any of these three elements. It can introduce sensitive receptors by changing the use of land, for instance by building new residential units on a site that was previously used for heavy industry. New pathways linking pre-existing contamination with an existing receptor can be formed, for instance when piling through a non-permeable layer connecting a layer of contaminated soils with a deep aquifer. Finally by introducing pollutants on the site a development project can introduce a potential source of contamination.

The second element to consider is the structured approach of an environmental statement. Apart from the introductory and procedural elements described in the environmental statement, a good environmental statement comprised the following sections:

• environmental baseline conditions
• potential environmental impacts
• mitigating measures
• residual environmental impacts

There should be a logical relation between the different sections. Any receptor that is affected and described in the section about the potential impacts and effects should have been introduced in the section describing the baseline. Any material impact should be assigned a mitigation or management action etc. Implementing this structure allows a clear description and understanding of the environmental impacts and the way it will be managed.

Applying these principles to contaminated land will result in a baseline condition section that describes the current sensitive receptors that are present within the potential sphere of influence of the development, the sensitivity and importance of these receptors, the presence of any pre-existing contamination and the presence of actual and potential pathways. The next section, potential environmental impacts or effects, first considers the impacts that the development will have in terms of the introduction (or removal) of sensitive receptors and the creation of new pathways between existing and potential pollution sources and receptors. In addition this section will describe the potential environmental impacts that are associated with the introduction of new sources of contamination. In the third section, mitigating measures, a description of the actions to mitigate each of the impacts that may occur should be provided. Finally a statement of the residual impact of the development is provided in the last section: residual environmental impacts.

Paul Giesberg is an environmental consultant with a special interest in environmental impact assessment and sustainability in land use development.

2008 - Going Green Tech News

Becoming Energy Efficient to Save the Planet

Save the planet! As Earth Day approaches April 22, what are you doing to get ready? Earth day is an event that started to bring attention to our environment. How we handle our garbage reflects our environment. Here are three tips to help save our environment.

• First, recycle. Recycling is taking some of our garbage and reusing it, directly or indirectly. To recycle a water bottle, you may reuse it again and again. But for gallon milk jugs or 2 liter soft drink bottles, you may opt to collect them and bring them to a recycling center. The recycling center will forward them on to a company that will melt them down and reprocess them.
• Second, shop efficiently. Try using what your Grandma used when she cleaned her house. Try using vinegar and baking soda. There are lots of sites that recommend natural cleaning products instead of chemicals. Also, buy those products in bulk. It reduces packaging which ends up in our garbage dumps and it may be cheaper, the more you buy, the cheaper it is.
• Third, conservation. Since I already have compact fluorescent light(CFL) bulbs installed, turning off the lights when I leave is the next best thing. My Mom always told me to turn off lights when I leave a room. She was right. Using more electricity only raises your electric bill. It will also increase your carbon footprint.

Education is a goal of Earth Day. Educating everyone from adults to children can get involved. Challenge your kids to come up with projects to bring attention to our environment. When we teach our next generation, we are saving our planet. But first, we must start ourselves. Be a steward of what God gave you. Become energy efficient by recycling and conservation. Our planet is worth it.

And now I would like to invite you to join me in learning energy saving tips you can do yourself to decrease your electric bill at http://energyconsciousconsultant.com Energy conservation should be out goal.

England Tech news

CO2 Footprint of a Product

We’ve certainly seen quite a few companies come out and say that their manufacturing facilities have a zero impact on the environment, meaning zero footprint, but indeed, there is much controversy on how to determine what a zero foot print is. It’s almost impossible to get to zero, even if a company goes and plants 10,000 trees over the course of 5-years.

The other day at a Think Tank meeting, we were talking about how to establish a complete CO2 discharge chain of a product, including all its components in the process of making it. From the wrappers, card board box, printing, assembly, energy to do all that, the distance the people traveled to work in what type of cars, etc. I mean really narrowing down the actual discharges.

Not because we are Global Warming alarmists, but because we feel it is not exactly correct for a company to claim Zero Emissions. And that we must have a more realistic view of the total process, Supply chain and all.

Many companies like Dell in Texas have stated that they have finally achieved zero emissions, but they were attacked for stating that, why? Because, everyone has a different concept of what nothing is. In other words we are all out there fighting over nothing and that makes no sense to anyone, no matter how you figure it.

Indeed, we should be applauding Dell for their solar panels, LEEDs certified warehouses and assembly plant and all their hard work and meaningful dedication to do the right thing. And yet, we are not doing that are we? Instead we find people attacking businesses, even those that go out of their way, spending millions of dollars to do the right thing. I ask are we doing the right thing by allowing persnickety environmental complainers to attack America’s greatest companies?

Lance Winslow – Lance Winslow’s Bio. If you have innovative thoughts and unique perspectives, come think with Lance; http://www.WorldThinkTank.net/.

Tech Lab's Comedy Hour

5 Easy Tips For Saving Money and Conserving Water

Everyone is looking for ways to save money and help conserve our natural resources. There are many methods that are easy to start in your own homes, but one very simple and obvious way to save is by reducing water consumption. Here are just a few easy water saving tips that you can begin doing today.

1.  Turn off running water in your sink or shower when you’re actually using the water. You can easily fill the sink with a enough water to wash your face, or fill a cup to brush your teeth. You may consider turning off the shower faucet while you’re washing your hair and then turn on again to rinse. Think about how much water is wasted. The same goes for dishes in the kitchen, turn off the water until you’re ready to rinse.

2.  There are low-water consumption toilets available that use only a couple of gallons of water each time they are flushed. If you have a standard toilet, one green living tip you may consider is placing a plastic bottle filled with sand into your toilet tank. This little trick helps the tank fill up faster and use less water.

3.  The laundry is another area where it is easy to waste water, and just as easy to save. Do your laundry in large loads rather than several smaller ones.

4. Limit your water waste outdoors. Don’t wash your car or driveway as often as you have been, and when you do, turn off the outside faucet until it’s time to rinse your car.

5. Look throughout your home, checking the faucets, toilets and pipes for any leaks. The very smallest of drips coming from a leaking pipe can eventually cost you a lot of money. Fix any leaks that you find.

If you are looking for simple ways to save the planet and save yourself money, start at home with these 5 easy steps. The planet and your wallet will thank you.

Learn more Green Living Tips and Ideas at http://greenlivingtipsandideas.com

Electronics’s Recycling

Society’s technological advancements have grown significantly over the years. Electronics devices such as telephones, cell phones, radios, CD and DVD players, televisions, and computers are products that are used in every household. These items are just a few of the many electronic devices that can cause serious environmental damage due to their toxic components. Electronics that are in need of disposal are referred to as e-waste, or electronic waste. Because of the advancement of electronic products, there has been a growing concern about the hazards of electronic waste. Some of these concerns include: improper disposal of toxic materials, health and safety concerns for people disposing of these items, as well as dangers to the soil and water supply. For instance, electronics are made using a considerable amount of toxic substances such as lead, cadmium, aluminum, zinc, copper, and plastics which can all leak poisonous material in the ground and water. These environmental concerns have resulted in the establishment of electronic recycling facilities and industries who take old electronics such as computers for the purpose of recycling and safe disposal.

Electronics containing materials such as metals, plastic, are valuable to the recycling companies. Disposing of electronics through a recycling company will result in fewer electronic devices going into landfills and lower carbon emissions.

Recovering Raw Materials: Recycling electronics involves recovering raw materials from the electronic equipment. Materials such as steel, copper, wires, aluminum, brass, plastics, glass,etc., are extracted and sold to smelters so they can create raw materials. Depending on the type of metal being extracted, they can be processed and used in products required by such businesses as the steel, construction and cement industry. Plastics and wood can be used as fuel to provide heat to industrial furnaces which converts to steam. Metals such as copper are sold to metal refineries.

Plastics: Plastics from such items as computers, computer mice, and keyboards, are sent through shredding processes and machine sorted. They are then sent to other recyclers for further processing.

Larger Electronics: Items such as televisions and computer monitors are dismantled by hand. The leaded glass cathode ray tubes are removed and disposed of safely. Plastics, copper, and circuit boards are removed, separated, and processed.

Hazardous Items: Toxic items are removed from electronic devices and disposed of safely. Toxic substance can include leaded glass, rechargeable batteries, non-rechargeable batteries (i.e.alkaline, lead acid, cell batteries) mercury in lamps and switches, parts containing polychlorinated biphenyls, as well as ink and toner cartridges. The remaining non toxic materials are processed and the recyclable materials are recovered. The materials are shredded and separated according to type. For instance, they can be divided into such materials as steel, copper, aluminum, and plastic.

Refurbished Electronics: There are now many companies that acquire used computers, repair and update them, and resell them at a much lower price. This is a great way to keep electronics out of landfills and make technology more affordable.

Donate Your Computer: If you are getting rid of your old computer because of a recent upgrade, consider donating it to charity. Many schools and non profit organisations are in need of computers. There are companies and businesses that will take your computer, refurbish it, and donate it to a needy cause. Make sure your computer is wiped clean of all information before donating it. Donating your computer helps the community and the environment.

We are fast becoming a technology dependent society. When it comes to protecting and conserving our environment, we have to adapt and change our technological practices to ensure a sustainable future. Recycling electronics is a great way help the planet.

Know that repairing a computer or laptop repair Toronto is not cheap, but it can be cheaper than having to replace the computer. If you run into these situations, you will need to hire a onsite computer repair service Toronto.

To Reveal a Product’s True Cost An Environmental Tax?

Sometimes, simple acts such as going to the grocery store can turn into a moral dilemma. Is it better to choose the piece of organic fruit produced on the other side of the country or the non-organic version grown locally, 50 miles away? Are the benefits of chemical-free shampoo worth an extra 5 bucks a bottle? Will I really be able to enjoy a cheap chocolate bar knowing that the growers of the cocoa beans were likely not fairly compensated?

As much as I’d like to say that I always buy the product that is environmentally safe and sustainably produced, in reality, that’s not always the case. First, the sheer amount of information required to be able to distinguish between products is staggering. You need facts regarding environmental impact, transportation costs, and fair trade practices, to name just a few. And there are plenty of misinformation and greenwashing campaigns out there to steer you in the wrong direction.

Second, of course, there are times when the high cost of an ethically made product turns me off from buying it. Even consumers with the best of intentions have their breaking points.

The thing is, companies who go out of their way to implement sustainable practices endure a greater cost of production. Sure, they can sometimes capitalize on this by marketing to conscientious consumers who are willing to pay a bit more, but the fact remains that in today’s system, environmentally minded production is punished.

On the other hand, companies who move their factories (and jobs) to developing countries with lax environmental standards and cheap labor are able to make products at a fraction of the cost and undercut their competitors (while shipping materials and finished goods all around the world and adding to our greenhouse gas problems).

The way it’s set up, high environmental standards in one country drive companies to relocate in places where it’s permissible to pollute in order to compete in the marketplace. Chaco, the Colorado-based athletic sandal company, is a prime example of even a well-intentioned company being forced to follow suit to maintain competitive pricing on their products. In fact, 95% of all footwear in the world is produced in China, whose poor environmental regulation and sometimes dangerous environmental problems are well known.

With current talk about cap and trade emissions programs, this phenomenon may only get worse.

So how do we even the playing field and reward companies for good business practices?

When I think about this problem, I keep coming back to an idea I encountered in a casual conversation with a stranger while traveling. I can’t remember his face or his name, but his idea has stuck with me and festered in my mind for the better part of a year. His take was that putting the financial burden of environmental responsibility on the companies just doesn’t make sense for the reasons I’ve given above. In a global marketplace, it renders companies less competitive than those that operate free of environmental and labor regulations.

Wouldn’t it make more sense to put an “environmental impact” or “ecological footprint” tax on the product itself?

Ugh, a tax?

Initially, I didn’t warm to the idea either. But think about it: adding a tax proportionate to a product’s ecological and social footprint eliminates the cost advantage of irresponsible production. All those environmental costs that are currently not included in our economic system would be factored in and would increase the price of unsustainably made products.

This, in turn, would make moral dilemmas at the grocery store much easier. Is it more sustainable to buy distant, organic produce or local, non-organic produce? The tax-adjusted pricing should inform my decision. Can I afford the chemical-free shampoo? Yes, because the price of its chemical-laden competitors would be raised through the environmental impact tax and eliminate the cost advantage of choosing that product.

The money raised from the tax could fund its implementation and other sustainable programs such as public transportation (high speed rail, anyone?) and alternative energy. Perhaps it could even make a dent in our gaping budget deficit.

Won’t this cost me money?

You may be thinking, “Sure, that’s a good idea in concept, but that will raise my bills – grocery, clothes, everything.” Well, yes, that’s true. But maybe if we see the true cost of the products we casually consume, we can make a more informed decision about what is really necessary to our lives.

Additionally, programs such as this often have the greatest impact on the poor. But this could be compensated for by using some of the tax revenue for need-based assistance programs.

Regardless, running an economic system on the assumption of infinite resources is fundamentally flawed. Currently, environmental impacts such as air pollution, water pollution, and deforestation are not factored into the cost of a product: they are considered “externalities.”

These costs need to be included in the system in a way that does not punish those who engage in sustainable business practices. By taxing a product’s environmental impact, it levels the playing field for the consumer.

Disclaimer

Of course, I am not an economist or policy guru. I don’t know how to implement such a tax or if it would even be possible (though compared to creating a carbon trading market, perhaps it’s not that difficult). This is only the musing of a concerned, intelligent citizen trying to brainstorm ways to make our economic system fit within the bounds of our ecological constraints.

What do you think? Would such a tax have a beneficial effect on our production system? Join the conversation over at our website!

Jill Mueller is a conservation biologist, avid cyclist, and freelance writer. She has combined forces with a good friend and dietitian to start The Barefoot Badger, a blog promoting healthy, sustainable living. Check us out!

Green Reuse Tip It

It is good practice to reuse as much as you can. It will prevent waste and for plastic items help keep them out of dumps!

Items you can Reuse at least once:

* water bottles. as long as you keep them clean, you can reuse them several times. It will save you money just to refill the bottle with tap. refrigerate it and you are good to go.

* newspaper. you can use old newspapers to clean your windows and mirrors, as shelf liners and more. reusing newspapers can really help save on paper purchases, thus saving trees!

* donate or free-cycle. items like clothes, toys, books…almost anything can be donated or given away instead of tossed. just make sure it is clean and in decent condition.

* make compost. use your unused natural food items to make compost.

* batteries. stop buying one time use batteries and only purchase rechargeable ones.

* refillable. buy condiments, shampoos and the like in large containers and refill smaller user-friendly container for it. This will help you buy less bottles and use less plastic!

* bags. stop using paper and plastic bags. buy canvas bags and reuse them over and over again.

* paper. any time your printer messes up or you make an error when using paper, let your kids use it to color on. or, you can use it as scrap.

* clothing. use old socks, t-shits and cloth materials as rags, to clean the car or to dust with.

* egg cartons. these can be reused for arts and crafts, paint holders, taco items, or even to organize jewelry or small items.

* plastic milk jugs. these can be used for pots for plants or even to water them.

* cardboard boxes. go to a fun place with your kids that has a hill and have a summer sledding competition! cut large squares and use the cardboard as your “sleigh.”

As you can see, there are many many ways that you can reuse items you use everyday. Be creative and brainstorm about how you can make the most of everything and be a good steward to God’s planet!

Copyright © Green Christian Network, All Rights Reserved

About the Author: Cindy Taylor is a Christian stay at home Mom who love the Lord and cares about God’s planet. You can see her passion and writing at her website, Green Christian Network (http://greenchristiannetwork.com).

Bees dying Green Tech News

How Water Extraction is Done in DC

There are many beautiful and interesting sights in Washington DC, among them are the White House which has been home to every president of the United States ever since 1800; the Tidal Basin Lake famous for its abundant Japanese cherry trees that blooms in Spring; the Lincoln Memorial and Jefferson Memorial, Washington Monument, etc.

But regardless of the beautiful tourist attractions that one could go to in the State of DC, natural calamities in the form of flooding sometimes happen. And when it does, most household residents in DC do the physical cleanup by themselves without hiring water extraction professionals or experts to deal with the situation. Prior to actual removal of water and cleaning, the starting place of the water which caused the flood should be identified as soon as possible and fixed permanently to prevent it from arising all over again.

Cleaning would usually require having to remove all visible waters first by making use of a wet vacuum pump or a bucket – depending on the volume and availability of equipment. The extraction process must be done immediately or as soon as possible to avoid a higher cost of damage inflicted by the dirty waters and also to thwart of any possibility that the area becomes a source of infectious diseases due to the presence of pathogens.

When all the water has already been extracted, floor coverings should be removed immediately and disposed properly. This includes removing items which came in contact with the flood water that are very porous, because the high absorbency rate of such materials has already contaminated the item in question making it very dirty and highly infectious. No amount of cleaning or fixing could reinstate it in its previously clean state; hence replacements should be made eventually if still needed.

Brushing all affected surfaces with a soapy water solution removes the presence of dirt. Pay particular attention to dirt which is inserted within cracks on walls and floors. Rinse the entire area by using a mop and bucket or a garden hose with a spray gadget.

When the rinsing stage has already been done, disinfecting the entire place is a must to remove remaining germ and fungal spores. Remember that disinfecting does not entirely mean total sanitation but a means of making the area or place habitable again. Never mix chlorine bleach with other cleaning products that contain ammonia as this will produce poisonous gas. Before and during application of any disinfectant, make sure to open all air passage ways and vents to avoid inhaling the vapors of the disinfecting agent upon application.

After having done the disinfection phase, the whole area must be thoroughly dried out, and drying usually takes a couple of days or weeks depending on how big the place is and the weather. The re-occupation of any living space which has been previously flooded must only be done once the area is declared by a professional water extraction expert to be absolutely dry. The dryness is tested by a moisture meter which shows the amount of moisture above and below a given area.

Leo Nov is an editorial staff member of RestorationSOS. To learn more about Water Extraction visit our website. Click here for more information on Water Extraction DC.

News of Online -G.1440

Blogging Sustainability Pt.1

Copenhagen’s Spring – Scientists Ask For Higher CO2 Cuts

The International Scientific Congress on Climate Change was held in Copenhagen between 10th to 12th March and organised by the International Alliance of Research Universities (IARU): the conclusions will be published into a full synthesis report next June. Almost 1,600 scientific contributions of researchers from over 70 countries have been received, and more than 2,500 delegates attended the event.

Connie Hedegaard, Minister of Climate & Energy of Denmark said that we have “to avoid the unmanageable and manage the unavoidable” and she pointed to their example: this European country has become a net energy exporter in 30 years, creating a green growth as a stable solution of the 70s oil crisis. The messages of the congress are various. The risk that current trends of the climatic system will accelerate has a more defined and significant meaning: more probable abrupt and irreversible shifts, and we are already above the worst scenarios published by the Intergovernmental Panel on Climate Change (IPCC) in 2001. Thus the big problem is trying to at least slow down these trends if not reverse them. The experts tell us that fast regional and global mitigation strategies are needed and that the more we wait the more expensive and ambitious actions will have to be taken in the future. The fact that scientists have come to the point of saying that “Inaction is Inexcusable” means also that people who studied relentlessly for decades are frustrated by the inaction of governments, businesses and people: it is understandable given that their work has not been considered and used enough, if not at all, up to now. They are speaking louder and clearer now. The different roles of politicians and scientists have to be combined. It is time for leaders to rely firmly on science as a basis for tough and unavoidable decisions. A “societal transformation” is being asked for by a wide group of the most intelligent people on the planet including diffusion of sustainable behaviours, innovative leadership, removal of subsidies and reduction of “vested interests”. These are all very explicit messages to politicians and public alike: there is a lot of work to do between now and next December’s COP15.

In the final debate the Danish Prime Minister, Anders Fogh Rasmussen, summarised the six messages given by scientists as 6 keywords: Urgency (of the climate change challenge), Direction (long term target to be defined), Action (short term targets to be set), Fairness (to the poorest and most vulnerable), Opportunity (to originate large benefits), Governance (creation of a new global multilateral era). He stated firmly that “Business As Usual is dead” and asked his colleagues to follow Obama’s call for a Green New Deal, already asked for by public opinion and by many political parties in the world.

After the final debate with the panel of scientists an impatient Rasmussen asked for clear words on the CO2 emission target to be set in the new treaty. Prof. Daniel Kammen, Obama’s Senior Policy Advisor, stated that an entire new industrial revolution is needed to cut 1990’s CO2 emissions by 80% in 2050 and Prof. Stefan Rahmstorf agreed on this point. The feeling was that the other panelists didn’t mind… At this point the Prime Minister concluded that the ambition for COP15 can be this -80% long-term objective following the precautionary principle to avoid worse impacts (than the ones presented in 2007 IPCC report) already hypothesized by new works. Overall a more direct communication between scientists and policy makers took place in this huge meeting: now it’s time for delegations to study and prepare the ground for brave steps forward to be made by the international community in Copenhagen’s crucial Conference of the Parties #15. Will we be able to navigate better our “ship” in the solar system during the over 200 rotations it will make before then?

Written by Luca Marazzi on behalf of Responding to Climate Change.

For further information on Climate Change please visit the Responding to Climate Change website –
http://www.rtcc.org

*Next event: Copenhagen, 24-26 May 2009. World Business Summit on Climate Change

Activated Odor Combatant Carbon ?

There are many stinky things in the world today. From the bathroom to the kitchen there are things in everyday life that can cause a nose to curl. However, activated carbon can quickly eliminate odors in the home, office, or commercial building. While many products simply mask odors or cover them up, activated carbon can absorb the odor and eliminate it once and for all. There are many ways that activated carbon can be used within a building to remove odor. Whether the smell is a permanent or occasional odor, activated carbon can be used to eliminate it.

Air Filtration Systems

An air filtration system can be placed on the air supply to any building to help eliminate the odors in the building. If there is a central heat and air system in the building the air filtration system can be used in the circulation process. A free standing air purification system can also be used in bathrooms that are used by numerous employees. These systems are much more effective than other means of removing odors.

Odor Blocking Masks

For those who work or play in environments that are not appealing to their noses there are activated charcoal masks that can be worn. These masks work to block the smells from reaching the nose. As the smell passes through the mask it is sucked up against the carbon and held there, eliminating the smell. These masks are perfect for those who work with garbage, waste, or cleaning products.

Flatulence Elimination pads and Inserts

Flatulence is a problem for many people today. Because of a fast paced environment and fast food restraints many people experience this condition. Luckily, there are now flatulence pads that can be used to eliminate the odor that accompanies flatulence. These pads can be placed in a chair for those in an office. However, there are also flatulence pads that can be placed inside the undergarment to eliminate odors.

Odor Eliminators for Pets

Activated charcoal can also be used to eliminate the odor that accompanies pet ownership. There are many smells that can come from litter boxes, accidents on the floor, and messes made in the yard. However, activated carbon can be made in the form of a powder. This powder can be sprinkled into the litter box, on the carpet, or in the yard outside. For use on the carpet in can be sprinkled on and then vacuumed up However, in other places it can be left to continue working. It is perfectly safe to use around pets and will not cause any harm if they ingest it.

There are many uses fro activated carbon today. It is an excellent odor eliminator. While these are many of the uses for eliminating odors there are many more. Anywhere there is a smell or odor; activated carbon can be used to eliminate it. This product is a green option for cleaning, absorbing, and eliminating odor. Activated carbon also has many other uses including purification, detoxification and moisture absorption.

Carbon Resources Management Team has over 70 years of experience in the Activated Carbon and Activated Charcoal carbons industry. Our Sabre series® activated carbon products are the most diverse line of activated carbon products on the market.

Article Source: http://EzineArticles.com/?expert=Kim_Walsh

The Classroom of Mobile Technology